| |
| PCI can
custom design diffusion films to meet your transmission
and opacity requirements, and apply our hardcoat formula
to a variety of substrates. Carbon black coatings can
be custom designed to meet a wide variety of needs in
the optical display market where laser ablative technology
is required. |
Diffusion
Films |
 |
| Description |
| PCI
offers a wide range of custom designed diffusion films.
Both the gauge and diffusion characteristics (opacity)
can be modified to accommodate the customer’s needs
as well as providing the diffusion layer on a single side
or both sides of the film. The lower opacity, single layered
films can also be employed as “intimate contact”
overlays exhibiting excellent optical clarity to the under
layer graphic while providing both protection and minimizing
finger printing. |
| Construction |
| |
| DF25-SM7 |
| DF25-SM7
is a 7 mil durable polyester film with a diffusion layer
on a single side, exhibiting an average opacity of 25. |
| DF35-DM4 |
| DF35-DM4
is a 4 mil durable polyester film with a diffusion layer
on each side, exhibiting an average opacity of 35. |
| DF55-DM4 |
| DF55-DM4
is a 4 mil durable polyester film with a diffusion layer
on each side, exhibiting an average opacity of 55. |
Hardcoat
Films |
 |
| Description |
| HC-PET-7
is a 7 mil polyester film with a hardcoat applied to one
side designed with scratch and solvent resistance properties.
The hardcoat coating can be applied to polycarbonate (HC-PC)
and is available in various gauges. |
| Typical
Properties |
| Mechanical |
| Film |
7.0
mils |
Heidenhain
NT-12 |
| Product |
7.3
mils |
Thickness
Gauge |
|
| Surface
Hardness |
| Pencil |
>5H |
ASTM D 3363 |
| Haufmann |
18.0 |
PCI Internal |
| Tabor |
0.2 |
ASTM D 5650 |
|
| Solvent
Resistance |
| Toluene |
Passed |
PCI
Internal Method |
MEK |
Passed |
PCI Internal
Method |
| Methanol |
Passed |
PCI Internal
Method |
| IPA |
Passed |
PCI Internal
Method |
|
| Chemical
Resistance |
| 5% NaCL |
Passed |
PCI Internal
Method |
| 5%
HCL |
Passed |
PCI Internal
Method |
|
| Description |
| PCI
offers two carbon based laser ablation coatings that incorporates
an IR-UV coating and is available on an optically clear
polyester base in a variety of gauges. These laser ablation
films requires no special light protection during handling
and are completely dry processed requiring no chemicals
to process the image. These films have been designed to
replace silver halide films employed as negative or positives
to expose flexographic printing plates. These films should
only be exposed with a laser that employs a vacuum debris
cleaning capability. |
| LA-M-7 |
| LA-M-7
is a 7 mil polyester film with a matted carbon based coating
that exhibits a matte finish after ablation in the ablated
areas. |
| LA-C-3 |
| LA-C-3
is a 3 mil polyester film with a glossy carbon based coating
that exhibits a clear finish after ablation in the ablated
areas. |
|
|
|
|
@Precision Coatings,
Inc. 1996-2007, All Rights Reserved |
|
