| |
|
Laserpoint
II Thermal Ablation Film |
| |
| Laser
Point II is a patented laser ablatable film used with
infra-red laser plate imagers with a vacuum system. Primary
User Benefits include: |
•
Cost Savings in Equipment- eliminate the image setter
($25,000 - $100,000)
• Chemical free processing - eliminating waste removal
costs
• Requires no processing.
• Film is more robust and scratch resistant than
silver film
• Available in 7 mil and widths up to 72”
(180cm+) |
| MATTE
The
IR - UV absorbing layer is ablated leaving a matte finish
in the ablated areas ready for use.
Imaged
film with a matte layer in the ablated areas for assisting
vacuum draw down
|
|
| Recommended
Equipment
Kodak: ThermoFlex
Screen: PlateRite FX870
EskoArtwork: CDI Spark
"PCI
does not warrant LPII's use in any particular equipment.
Please refer to your laser manufacturer for assistance
in using this film."
|
|
Focus
and power tests must be run to determine proper
exposure parameters for each platesetter.
|
|
| Handling
Characteristics |
LaserPoint
II Thermal Ablative film can be handled in normal room
light. |
| |
| Unique to LaserPoint II is that
it delivers a matte film in both the image and ablated
(non-image) areas or can be converted to a clear (non-matte)
film in the ablated areas. A matte film is
essential during vacuum draw down to prevent air pockets
from forming between the plate and the film interface
in large ablated areas.
|
| Using
Film Cleaners |
| The recommended film cleaner for
LaserPoint II is SPRAYWAY SPECIALTY FILM CLEANER #206.
To locate a distributor near you call Sprayway, Inc. at
630-628-3000.
|
| Platesetter
Proofing |
| LaserPoint II film allows the
user to pull a proof using the same platesetter that is
used to make flexographic plates. No expensive imagesetter
needed to make silver halide based proofs. Use existing
platesetter No additional film required.
|
| Recommended
Storage Conditions |
40º F - 150º
10% RH - 90% RH |
| |
| Anderson
& Vreeland Inc. |
| Contact: Kevin Kerr -
(419) 636-5002 |
| Kkerr@andvre.com |
| 15348 St. Rt. 127 |
| P.O. Box 527 |
| Bryan, OH 43506 |
|
|
|
| Pitman
Company |
| Contact: Peter Spain
- (800) 526-5441 |
| PSpain@pitman.com |
| 36 Olde Lantern Rd. |
| Bedford, NH 03110 |
|
|
|
| Eastman
Kodak Company |
| Contact: Mark Allen - (585)
722-0453 |
| mark.allen@kodak.com |
| 2600 Manitou Road |
| Rochester, NY 14653-4150 |
|
|
|
| Cross-Link
Pacific, Inc. |
| Contact: Masayuki
Konai - 81-3-5906-1120 |
| masayuki.konai@crosslinkpacific.co.jp |
| 1-75-10 Asahigaoka |
| Nerima-ku, Tokyo |
| 175-0005 Japan |
|
|
|
| Service
Offset Supplies Ltd. |
| Contact: Mike
Milfull - 020 8502 4291 |
| serviceoffset-inbox@yahoo.co.uk |
| Oakwood Hill
Industrial Estate |
| Oakwood Hill |
| Loughton |
| Essex IG10
3TZ |
|
|
|
| Netsel
Graphics |
| Contact: Merve Salargil
- +90 212 886 33 33 |
| merve@netselgrafik.com |
| Çakmakli Mah 3.
Cad 113. Sok |
| No:7 Kiraç-Büyükçekmece |
| Istanbul
34500,
Turkey |
|
|
|
| |
| Sales
Contacts For Custom Products and Services |
| Southeastern
& Western U.S. |
Dean
Bell |
(770)
218-2791 |
|
| Northeast &
Mid-Atlantic U.S. |
Harry Alpern |
(215)
657-4046 |
|
| Midwest
U.S. & International |
Bruce Gabbitas |
(248)
363-8361 |
bgabbitas@pcicoatings.com |
| LaserPoint
II |
Lynda
Walker |
(248)
363-8361 |
|
|
|
|
|
|
@Precision Coatings,
Inc. 1996-2007, All Rights Reserved |
|
